Direct Injection
Posted: 26 July 2010 07:19 AM   [ Ignore ]
Newbie
Rank
Total Posts:  6
Joined  2009-12-02

I have a Chevy Cobalt Turbo grin http://i705.photobucket.com/albums/ww60/RAHOD_photos/th_001-3.jpg
Like so many newer DI cars, it’s prone to Intake Valve deposits for obvious reasons.
Can MMO *help* with minimizing deposits on the intake valves of these cars ( since it *should* make it into the deposit prone oil that coats the back of the valves).
I just added to gas and crank case..about 500-100MI before I plan an OC.

Thanks..

Profile
 
 
Posted: 26 July 2010 03:16 PM   [ Ignore ]   [ # 1 ]
Administrator
Rank
Total Posts:  28
Joined  2008-01-15

Yes, add MMO to every tank of gas and it will help minimize deposits.  Also, GM has designed their DI cars to run on “Top Tier” gasoline.  Check your owner’s manual for more details.  The manual should help clarify fuel requirements.  All gasoline does contain minimum levels of deposit control additives as required by the EPA.  However, gasoline deposit control additives can vary from the fuel blender.  As for adding MMO before an oil change, be careful not to overfill the crankcase.  Yes, MMO will cut through sludge, however, a new car should not need an engine flush yet.  Hope this helps!

Profile
 
 
   
 
 
‹‹ MMO Sales      Jeep ››